B1
-A
2Z
0-
7D
00
01
/
Re
vis
ion
A
/
29
Jan
uar
y 2
014
-
Aut
om
ati
on
Tec
hn
olo
gy
-
35
95
18
Operating Instructions
(Translation)
RFID Snap-on Module
for Mobile Computer MC 959x Series
BARTEC GmbH Max-Eyth-Straße 16
97980 Bad Mergentheim
Germany
Tel.: +49 7931 597-0
Fax: +49 7931 597-119
info@bartec.de
www.bartec.de
Reservation Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
5/5
8. Maintenance, Care and Cleaning
For smooth and trouble-free operation we recommend cleaning the devices
at regular intervals depending on the degree of stress to which they are
exposed and handling them with care.
The owner / managing operator of an electrical system in a hazardous
environment must keep the operating apparatus it in good condition and
operate it correctly. Only an electrician may perform maintenance work or
troubleshooting.
Before starting operation again, check conformance to the applicable laws
and directives. The given safety instructions must be observed when
performing maintenance and/or troubleshooting.
DANGER
There is a risk of a fatal injury in an explosive atmosphere!
Take the devices and/or accessories out of the hazardous area
before cleaning them.
Devices can be destroyed if handled inappropriately.
Care
Recommendation
Enclosure
-
Protect the device from impacts.
-
Do not expose the device to any extreme stress, e.g.
violent jolts or drops from great heights.
Environment
-
Do not expose the device to any extreme
temperatures (e.g. do not put it down on the
dashboard in a car)
-
Do not put it down in a dirty, damp or wet
environment.
Cleaning
Suitable cleaning agents
Enclosure
-
Alcohol wipes
Interface
contacts
-
Use a cotton bud dipped in an alcohol solution to
remove all grease and dirt deposits from the
contacts.
-
Repeat cleaning several times.
-
Before the device is inserted again, the interface
contacts must be completely dry and there must not
be any fluff left hanging on them.
-
If necessary, use compressed air to clean the
contacts.
CAUTION
Personal injury due to incorrect use of compressed air!
Do not point the nozzle on the compressed-air hose towards
yourself or any other person. In particular, never point it at a
person’s face.
9. Disposal
The components in the RFID snap-on modules contain metal, plastic and
electronic parts.
Our devices are intended as professional electric devices for
business use only, referred to as B2B devices under the WEEE
directive. The WEEE directive sets the framework conditions for the
applicable EU-wide handling of waste electric and electronic
equipment. This means that you are not permitted to dispose of this
equipment in normal household waste It should not be given to the
collection sites set up by the public waste management authorities
either but instead it should be disposed of in a separate collection in
an environmentally sound manner.
All products acquired from us can be sent back to us when our
customers are disposing of them. We ensure that they are disposed
of in accordance with the respective applicable statutory regulations.
The sender pays the costs of the dispatch/packaging.
10. Order numbers
Configuration
Type number Version
Type
Frequency range
B7-A2Z0-0020 Ex
RFID LF Reader
125 kHz / 134 kHz
B7-A2Z0-0021 Ex
RFID HF Reader
13.56 MHz
B7-A2Z0-0022 Ex
RFID UHF (US) Reader 902 to 928 MHz
B7-A2Z0-0023 Ex
RFID UHF (EU) Reader 865.6 to 867.5 MHz
G7-A0Z0-0001 Non-Ex
RFID LF Reader
125 kHz / 134 kHz
G7-A0Z0-0002 Non-Ex
RFID HF Reader
13.56 MHz
G7-A0Z0-0003 Non-Ex
RFID UHF (EU) Reader 865.6 to 867.5 MHz
G7-A0Z0-0004 Non-Ex
RFID UHF (US) Reader 902 to 928 MHz
11. Service Address
BARTEC GmbH
Tel.
+49 7931 597-444
Max-Eyth-Straße 16
Fax
+49 7931 597-119
97980 Bad Mergentheim
Internet:
Deutschland
E-Mail:
Compliance Information Statement
Compliance Information Statement (Declaration of Conformity
Procedure)
Responsible Party:
BARTEC US Corp
Address:
600 Century Plaza Drive
Suite C160
Houston, TX 77073
USA
Telephone:
+ 1 281 214 8542
Type of Equipment:
RFID snap-on-modules
Type B7-A2Z0-0020 and Type B7-A2Z0-0021
and Type B7-A2Z0-0022
Type G7-A0Z0-0001 and Type G7-A0Z0-0002
and Type G7-A0Z0-0004
Model Name: RFID LF Snap-on-modules
FCC ID: TBULFG2
RFID HF Snap-on-modules
FCC ID: TBUHFG2
RFID UHF (US) Snap-on-modules FCC ID: TBUUHFG2
