AVOID EXTREME
WRIST ANGLES
BARTEC GmbH
Max-Eyth-Str. 16 I 97980 Bad Mergentheim I Germany
Phone: +49 7931 597 0
info@bartec.de I www.bartec.de
Imaging
Camera Photo
1.
Open the Camera application.
2.
Point the TC75 camera at an object.
3.
Touch the on-screen shutter button.
ACCESSORIES
DATA CAPTURE OPTIONS
AVOID EXTREME WRIST ANGLES
1.
Ensure that an application is open
and a text field is in focus (text cursor in text field).
2.
Point the exit window at the bar code.
3.
Press and hold the Scan button.
4.
The red laser aiming pattern turn on to assit in aiming. When the TC75
decodes the bar code the Data Capture LED light green and a beep sounds.
5.
Release the Scan button.
For more information, see the TC75 User Guide available at:
Download: www.bartec.de/automation-download
BATTERY REPLACEMENT
4-Slot Battery
Charger
2-Slot USB/Ethernet Cradle
Stylus
with Tether
1.
Remove any accessory attached to
the device.
2.
Press the Power button until the
menu appears.
3.
Touch
Battery Swap.
4.
Touch
Enter Battery Swap Mode
.
5.
Touch
Continue
. The Data Capture
LED lights red.
6.
Wait for the LED to turn off.
7.
Unlatch the hand strap. Push the
hand strap clip up toward the top of
the TC75 and then lift.
8.
Press the battery release latches in
and lift the battery from the TC75.
9.
Insert the bottom of the battery into
the battery compartment.
10.
Rotate the battery down into the
battery compartment.
11.
Press the battery down until it snaps
into position.
12.
Place the hand strap clip into the
hand strap attachment slot and pull
down to lock into place.
13.
Press the Power button to turn on
the TC75.
Do not replace or charge the battery in a potentially explosive atmosphere.
Danger to life in a potentially explosive atmosphere! Only replace or charge
the battery outside the potentially explosive atmosphere.
1.
Insert the bottom of the battery into the battery compartment.
2.
Rotate the battery down into the battery compartment.
3.
Press the battery down until it snaps into position.
BATTERY INSTALLATION
WARNING
LASER WARNINGS
BATTERY INFORMATION
Remove battery to decommission the device! The ambient
temperature range of use for secure operation within the
potentially explosive atmosphere is -20 °C to +50 °C.
Additional safety instructions for use in potentially
explosive atmospheres, see user manual.
WARNING
Front
Rear
