V1.2 TECH550PRO
Page 7
June 2022
TECH550PRO USER GUIDE
B
EFORE
G
ETTING
S
TARTED
C
HARGING
T
OOL
The TECH550PRO is shipped with a charged battery. It is recommended that the tool is charged
2+
hours
before first use. For optimum performance, always keep it sufficiently charged.
The TECH550PRO will notify the user when the battery has low power, and the battery icon will
change color from white to red. When there is an insufficient amount of power remaining in the
battery, the TECH550PRO will save all the TPM Data and then power itself off.
Your Tech550PRO Series tool comes with a factory-installed rechargeable battery.
Battery
replacement must be done at the Bartec USA Repair facility.
The Qi Inductive Charging Pad is the preferred method of charging. You can also use the supplied Micro USB cable
attached to either the Standard Wall Plug Power Supply or a PC. Only use the power supply or Micro USB cable that is
included in the PRO Series kit to charge this tool.
Use of unapproved power supplies may damage your tool and will void the warranty.
R
EGISTRATION
To create your Bartec Account and/or register your tool, please download the TPMS Desktop application from
. TPMS Desktop will register your tools automatically and download the latest updates to your tool.
If you are unable to download TPMS DT, the Bartec TECH550PRO can be registered at
. Follow
the on-screen prompts filling in the information and tool serial number. A valid serial number and supplier is required to
process the registration, which can take up to 24hrs once submitted.
U
PDATE
Once the tool is registered, verify the software level loaded to the level available online and update the tool if necessary.
DO NOT
apply
metallic labels
here!
