ICE-MAKER WATER TANK PARTS
A. Water dividing pipe with nine little holes, water will flow out from these little holes. If no
water flows out, it can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the
ice-harvest process is over or not.
D. Water tank
E. Water supplying pipe
F. Cover board on the right side of the evaporator
G. Water level switch installing plate
H. Water drain pipe of the water tank: When ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I. Water pump
J. Water level detecting switch
5
INFORMATION
