ASSEMBLY
2
WARNING
: Propane gas is highly flammable and under pressure in the cylinder or tank. Do Not
store or use gasoline or other flammable liquids or vapors in the vicinity of this stove. If you detect
the odor of gas,immediately evacuate the enclosed area and contact the appropriate authorities/
professionals.
ASSEMBLY
1.
Attach legs and secure locking nuts
2.
Place stove on a level, stable surface
3.
Make sure stove burner valves are in the OFF position
4.
Attach propane hose to the brass stove inlet fitting.
5.
Make sure propane bulk tank valve is closed.
6.
Attach propane hose to outlet of propane tank.
7.
Slowly open propane tank valve and check for leaks by applying small amount of liquid soap
and looking for bubbles to appear
.
CAUTION
DO NOT attempt to connect your camp stove to a natural gas supply. Use only with propane,
hose and
regulator supplied with the stove and an approved bulk propane tank.
OPERATION
1.
Hold a match or extended lighter flame near the burner. Slowly open the
regulator
valve on the stove (FIG. 1).
2.
Adjust the flame to the desired height Flame should be compact and blue with
a slight yellow tip. If the flame is too Yellow ad just the air mixture valve under
the throat of
the cast burner (FIG. 2) until the flame color is achieved.
3.
The burner outlets will change to a light gray/white after heating and use. This is
normal.
4.
After use, let cool for 15 minutes before storage or transport.
CLEANING
1.
Allow burners and steel grate to cool completely.
2.
Turn valve on propane tank to the OFF position.
3.
Remove propane hose from tank and stove.
4.
Stove may be wiped down with soap and warm water.
5.
Allow stove to dry thoroughly before storage.
6.
Never store stove with propane hose attached.
7.
No other maintenance is necessary.
STORAGE
1.
DO NOT leave propane tank attached to stove during storage or transport.
2.
Wipe the burners, steel cooking grate, and propane hose before storing.
3.
It is suggested to store stove and hose in a nylon storage bag to keep it clean.
SERVICE AND REPAIR
This product is a sealed unit and is not designed for repair by the customer. Do not
attempt to service the stove or hose and
regulator assembly yourself.
