Possible Malfunctions
105737
19 / 22
EN
6.2
Cleaning
1. Clean the appliance regularly after the end of each working day, or more
frequently if needed.
2. Wipe the heating plate, control panel and housing of the appliance with a soft,
damp cloth. Use mild, non-scrubbing cleaning agent if required.
3. Finally, dry the cleaned surfaces with a soft cloth.
4. Regularly clean the dust filter and grease filter with a mild cleaning agent or in a
dishwasher. To this end, remove the filter from its holder. When cleaning is
finished, introduce completely dry dust filter and grease filter into the appliance.
5. Ventilation openings at the bottom of the appliance should not be obstructed
with dirt nor dust. Clean them regularly with a brush or a blower.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error code
Cause
Solution
E0
No cookware on a hob or
inappropriate cookware.
Use only suitable cookware.
E1
Appliance is getting too
hot (e.g. due to
obstructed ventilation
openings).
Open the passage through
ventilation openings. Leave the
appliance to cool down and re-start.
If the error code is still shown in the
digital display, contact the service
company.
A damaged element (e.g.
a transistor).
Contact the service company.
Summary of Contents for 105737
Page 1: ...IK 70DP 105737 ...
