- 28 -
5. Installation and operation
5.1 Installation
Positioning
Unpack the device, remove and dispose of all package material according to
the environment protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.
Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.
Never
place the device on an inflammable surface.
Do not place the device near open flame, electric heaters or other heat source.
Never
place the device at the edge of a table to avoid tilting or falling.
Never
put the device in a moist or wet area.
Never
locate the device in the direct vicinity of walls, low wall, kitchen furniture, or
other objects. Make sure there is enough distance (at least 30 cm) from walls and
other flammable or prone to discolouration objects. Follow the valid fire protection
regulations.
When it is not possible to leave the recommended distance, use appropriate
protection means (e.g. heat-resistant foil that will ensure keeping the wall
temperature within the safe range (up to 60 °C).
Always keep the working area around the device clean and dry.
When locating the device, make sure the power plug is easily accessible to
immediately unplug the device, if necessary.
