- 31 -
The power supply circuit with the socket must be protected by the fuse at least
16A. Only connect the device directly to the wall socket, do not use any extension
cords or power strips.
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Inspection before start-up
Control
Procedure
Make sure that:
-
there are
no foreign
objects
in the pot
Visual inspection in order to make sure that there
are no foreign objects in the pot, like tools, towels,
etc., or any non-food products. Remove such
objects if found.
Check the cleanness of:
-
external parts
of the device
-
surfaces
of equipment
-
internal parts
of the device
Before the operation of the device all surfaces of
mentioned parts must be inspected visually for their
cleanness.
In case of mould or other contamination clean the
parts according to section
6 “Cleaning“
.
Check the condition of:
-
permanent protective
covers
-
device body
All permanent covers must fulfil their functions.
Perform the visual inspection of all mentioned parts
in order to make sure that their internal surfaces are
not damaged. After noticing the first symptoms of
wear/damage the parts must be immediately
replaced. Contact the service company.
Check the operational
condition of:
-
controlling/protective parts
-
control system.
All systems must fulfil their designed functions.
Use the systems in such way that they operate in
the expected way.
The parts revealing the first symptoms of wear or
damage must be immediately replaced. Contact the
service company.
Make sure that:
-
there are no strange noises
after start-up
In case of noticing any strange noises during the
inspection, indicating e.g. seizure or mechanical
fractures, turn the device off immediately and contact
the service company.
