background image

Pag.  8

1.1 IMPORTANT NOTICES

CONTENTS

1. INSTALLATION 

1. INSTALLATION ................................................................................................................................. Pag. 8

1.1 IMPORTANT NOTICES ........................................................................................................................................................ Pag. 8

1.2 POSITIONING ....................................................................................................................................................................... Pag. 9

1.3 EVACUATION OF EXHAUST FUMES .................................................................................................................................. Pag. 9

1.4 CONNECTING GAS ............................................................................................................................................................. Pag. 9

INSTALLATION INSTRUCTIONS ..........................................................................................................................................Pag. 9

CHECK BEFORE INSTALLATION ........................................................................................................................................Pag. 9

CHECKING THERMAL POWER .........................................................................................................................................Pag. 10

CHECKING GAS PRESSURE ....................................................................................................................  

Pag. 10

1.5 CONNECTING TO A DIFFERENT TYPE OF GAS ..............................................................................................................Pag. 11

2.  OPERATING INSTRUCTIONS ....................................................................................................... Pag. 12

2.1 STARTING UP FOR THE FIRST TIME ............................................................................................................................... Pag. 12

2.2 SETTINGS .......................................................................................................................................................................... Pag. 12

3.  CLEANING AND MAINTENANCE ................................................................................................. Pag. 13

3.1 ROUTINE MAINTENANCE ................................................................................................................................................. Pag. 13

3.2 SPECIAL MAINTENANCE .................................................................................................................................................. Pag. 13

3.3 CONTROL AND SAFETY DEVICES ................................................................................................................................... Pag. 13

SPECIFICATIONS TABLE FOR GAS FRY TOPS, CATEGORY II2H3+ ................................................................................... Pag. 13

THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY THE FEATURES OF THE 

APPLIANCES DESCRIBED IN THIS MANUAL. 

THE MANUFACTURER ACCEPTS NO RESPONSIBILITY FOR HARM CAUSED BY INCORRECT INTERVEN-

TIONS, TAMPERING WITH THE APPLIANCE, MISUSE, POOR MAINTENANCE, NON-COMPLIANCE WITH 

CURRENT REGULATIONS AND INEXPERT USE.

Read this manual carefully because it provides important information on safe installation, use and maintenance of 

the appliance. Keep this manual carefully, so that it can be consulted by different users. If the appliance changes 

owner the user manual must also be transferred to the new owner (if necessary, request a new copy from the 

authorised dealer or directly from the manufacturer).  

•  Only qualified persons must be entrusted with installation operations, adapting the appliance to different types 

of gas, commissioning and eliminating system faults. All current rules and regulations must be complied with. 

•  The appliance must be installed in accordance with the manufacturer’s instructions by professionally qualified 

personnel. .

•  The appliance must be used only by personnel who have been trained in its use. 

•  If the appliance is broken or faulty, disconnect it. If it needs to be repaired, use only an after-sales centre that 

has been approved by the manufacture and ensure that manufacturer approved spare parts are used. 

•  These instructions are valid only for the country whose abbreviations appear on the appliance rating plate.  

•  Non-compliance with the instructions contained in this manual may jeopardise appliance safety.  

The appliance conforms to the Gas Directive 90/396/EEC and has therefore been issued with a CE certificate 

issued by a notified body.  

It meets the following gas regulations:  

-  EN 203 + subsequent updates;

-  EN437 + subsequent updates.

Current installation safety regulations must be complied with.  

Summary of Contents for 131.1413








Reviews: