150993
5 / 6
EN
6. Keep a cup or a mug below the pump lid tap and
press the pump button, to operate the pump
mechanism.
The beverage will be pumped through the tube inside the
can to the container.
7. Press the pump button as long as the container is not
filled up to the required amount.
8. Close the lid lock, by putting the pump lid safety
button to the left, to the 'CLOSE' position.
Cleaning
CAUTION!
For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
Never place the thermal pump can in a dishwasher.
Never place the thermal pump can in water.
Clean the thermal pump can regularly after each use.
The pump lid of the can may be completely detached to facilitate cleaning.
Perform the following steps:
1. Open the pump lid pulling the lock upwards.
2. Press the fixing element in
the middle of the lid fastener.
3. Pull the top of the pump lid
up.
Summary of Contents for 150993
Page 1: ...5L 150993 ...
