6 / 6
150993
EN
4. Pull the pump tube from the holder and remove it
from the can.
5. Wash the pump lid and the pump tube in warm
running water with a mild cleaning agent.
6. Rinse in clean water.
7. Wash the thermal pump can in warm water with a mild cleaning agent.
8. Rinse multiple times with clean water to remove remains of the cleaning agent.
9. Reinsert the pump tube in the correct holder. Be sure to refit the sealing on the
pump tube prior to reinserting it.
10. Attach the lid on the thermal pump can.
11. Wipe the outside of the thermal pump can with a soft, moist cloth.
12. If the thermal pump can is not to be used for a longer time, clean it beforehand,
as described above, and leave it open to dry.
Removing remains from the thermal pump can
Hard water may leave calcium deposits inside the thermal pump can. Coffee usually
colour the deposits and leave the brownish deposit.
1. In order to remove the deposits use a cleaning agent available on the market.
Follow the descaling agent
manufacturer’s instructions on the packaging.
2. After cleaning, rinse the thermal pump can thoroughly with clean water several
times.
3. Leave the thermal pump can open to dry completely.
NOTE: For cleaning and descaling of the thermal pump can we
recommend the following Bartscher products:
Degreasing agent
Art. No. 173076
Descaling agent
Art. No. 173075
Summary of Contents for 150993
Page 1: ...5L 150993 ...
