Installation and operation
18 / 32
610842
EN
Indications for User
Opening the Appliance Door
1. To open the appliance door, pull the door handle gently. If the appliance is on,
the current thermal processing program will be interrupted.
CAUTION!
Before you reach into the thermal processing chamber, leave the door
open for a while to let the accumulated heat dissipate.
Closing the Appliance Door
1. Close the appliance door until the door safety lock system engages audibly.
If the current thermal processing program has been interrupted by opening the
door, the current thermal processing program will be continued after pressing
START key.
Thermal Processing Program Selection
1. Use numpad keys to select the required thermal processing program.
The program will start automatically.
Quick Start
Use this function to program the appliance to a convenient thermal processing, with
100% of microwave unit power output.
1. Press START key rapidly to set the thermal processing time.
The maximum thermal processing time to be set is 5 minutes.
2. Press START key once to set thermal processing time to 20 sec.; press twice, to
set 1 minute.
After two seconds the appliance will automatically start operation.
When the thermal processing time elapses, an acoustic signal sounds 3 times, and
'END' is shown in the digital display.
Switching the Appliance Off / Stopping Thermal Processing Program
In order to interrupt the current thermal processing program, proceed the following
way:
1. Press STOP key once.
The current thermal processing program will be stopped.
2. Open the appliance door.
The current thermal processing program will be stopped.
Summary of Contents for 18270D
Page 1: ...18270D 610842 ...