Installation and operation
14 / 22
370174
EN
• Leave at least 20 cm clearance from flammable walls and items.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• In order to connect the waffle maker, 2 separate sockets are required.
• Do not use the appliance with an external timer or remote control.
5.2
Operation
WARNING!
Risk of burns!
When in use, the baking trays and external surfaces of the appliance get
very hot.
Do not touch hot surfaces.
When operating the appliance, you may touch just the grip or the control
elements (temperature controller, ON/OFF switch).
Before the First Use
1. Before use, clean the appliance, observing instructions in section
6 “Cleaning”
.
2. Before the first use, heat the open appliance up without batter for approx. an
hour with temperature set to 180°C
– 200°C. Observe indications in the
“Switching on and Heating up the Appliance”
section.
Due to post-production remains, there may be a smoke produced during heating up.
This smoke is not hazardous to users and will not be generated during subsequent
operation of the appliance. Ensure proper ventilation during first heating.
3. Moisten the baking trays with food oil three or four times. Owing to this, the
pores in the cast iron trays will close and special film will be formed.
Switching on and Heating up the Appliance
