Installation and operation
A150623
17 / 22
EN
Igniting Burner (Fig. 3, 4, 9, 10)
1. Next, rotate the rotary controller (17) to
the leftmost ignition position (18) and
hold it for a couple of seconds in the
position until the ignition clicks. (Fig. 9)
2. If there is no ignition, repeat the
process.
Fig. 9
3. After igniting the burner set the rotary
controller (17) in the required position.
(Fig. 10)
ATTENTION!
During use, never set the gas
cartridge locking lever (20) to
UNLOCK (14) position.
Fig. 10
After Use (Fig. 3, 4)
WARNING!
The appliance and the gas cartridge become hot during operation.
Leave the appliance cool down completely before removing the gas cartridge.
1. Always remove the gas cartridge from the appliance after use.
2. Set the rotary controller (17) to OFF position (16).
3. Before removing the gas cartridge and prior to setting the gas cartridge locking
lever (20) to FUEL LOCK (13) position, check if the burner is out.
4. Open the gas cartridge shaft cover (6).
5. Then remove the gas cartridge (7) from the gas cartridge shaft (8).
6. Put the red protective cap and always store the gas cartridge independently
from the appliance, in a cool, dry and well ventilated place that children have no
access to.
Summary of Contents for 1K221-T
Page 1: ...1K221 T A150623 ...
