- 30 -
•
Never place the device on the flammable surfaces.
•
In order to avoid the compressor damages do not tilt the device during positioning
or transport by more than 45°.
•
Do not place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.
•
During the device installation keep in mind that the environment temperature should
not be lower than 0 °C and higher than 32 °C.
•
Do not place the device in places of high air humidity. The excessive humidity may
damage the device.
•
Place the cake display so that sufficient air circulation is ensured. Keep a distance
of at least 10 cm from walls and other objects.
•
Never cover the ventilation holes of the device.
•
After placing the device in its intended place, block the wheels equipped with brakes.
•
Do not bore holes or install other objects in the device.
•
Do not place any heavy objects on the device.
•
Position the device in such way that the plug is easily accessible for quick
disconnecting when required.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device
only in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•
Before use position the cake display and leave it for at least 2 hours before
connecting to the power supply.
•
After a power outage or after removing the plug from its socket do not connect
the device to a power source for at least 5 minutes.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
Summary of Contents for 400L
Page 1: ...400L 700214 V1 0415...
