background image

 

 

 

- 34 - 

6. Cleaning 

 CAUTION! 

Before cleaning, disconnect the device from the power supply (pull the 
plug out of the socket!). 
The device is not suited for direct washing with water jets. Therefore, you 
must not use any kind of pressure water jet for cleaning the device!

 

Make sure no water gets into the device. 

 

o

  Clean the device thoroughly at the end of the working day. 

o

  Disconnect the device from the power supply (pull the plug from the socket!). 

o

  Before cleaning open the glass door and remove all food products from the cake 

display. While cleaning the cake display, store the food in a refrigerator to avoid 
spoiling it.

 

o

  Remove the glass shelves from the cake display and clean them thoroughly with a 

soft cloth and a disinfectant appropriate for food service applications. After cleaning 
the glass shelves, rinse them in clean water and then dry thoroughly. 

 

o

  Clean the interior and exterior of the cake display regularly using an appropriate mild 

cleaning agent and a soft cloth. Rinse the cleaned surfaces with clean water to 
remove any leftover cleaning products, then dry the cake display before further use. 

 

o

  If condensate has gathered at the bottom of the device, remove it with a soft, wet 

cloth. 

o

  Never use aggressive or coarse cleaning agents such as scouring powder, alcohol, 

solvents or other substances that could damage the device’s surfaces. 

 

o

  Use a soft, dry cloth for drying and polishing the device. 

 
 
If the cake display is to remain unused for a longher period of time: 

 

 

  disconnect the device from the power supply (pull the plug from the socket!); 

  remove all food products from the cake display; 

  clean the interior and exterior of the cake display as in the instructions above; 

  rinse the device with clean water and thoroughly dry it; 

Summary of Contents for 400L




















Reviews: