- 35 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Malfunction
Cause
Solution
No cooling
•
Improperly connected
power cord
•
Electrical circuit safety fuse
has gone off
•
Power outage
•
Damaged temperature
regulator
•
Pull the plug and reinsert it
into the socket correctly
•
Check the fuse, check
the device by connecting
it to another socket
•
Check the power source
•
Contact the sales agent
Insufficient
cooling capacity
•
Device is too close to
source heat or direct
sunlight
•
Poor air circulation in
the device
•
Improper temperature
setting
•
Device is overfilled
•
Ensure sufficient distance
between the device and
heat sources
•
Ensure sufficient distance from
walls and other objects
•
Check the settings, set lower
temperature value
•
Remove excess food products
Device emits
loud sound
•
Device is placed on an
uneven surface
•
Device is touching the wall
or other objects
•
Place the device on an even
surface
•
Ensure sufficient distance from
the wall and other objects
The following conditions are not signs of malfunction:
1. The sound of flowing water. This sound is emitted during the normal use and it is the
sound of coolant flowing in the device.
2. Condensation gathering on external glass sides is normal in the increased
ambient humidity. Remove the condensation water suing a soft, dry cloth.
Summary of Contents for 400L
Page 1: ...400L 700214 V1 0415...
