Installation and operation
700807
17 / 24
EN
Button locking/unlocking
Button locking:
1. Make sure, there is no process in progress.
2. Do not enter any data for 30 seconds: the 'Loc' message will be shown in the
digital display for 1 second and the keypad will be automatically locked.
When the keypad is locked, the following functions are not available:
– switching the appliance ON/OFF
– displaying the temperature measured by the probe
– activating the manual defrosting process
– setting the working temperature
If you attempt to introduce these settings, there will be the 'Loc' message shown on
the display for 1 second.
3. Unlock the buttons before you attempt to introduce the data.
4. To unlock the buttons, press and hold one of the buttons for 2 seconds.
The 'UnL' message will be shown on the display for 1 second.
Digital display
When the appliance is switched on and in standard work mode, the digital display
shows the temperature inside the appliance. This is not the case for the defrosting
process, when the digital display shows the 'dEF' message.
When the appliance is switched off with the ON/OFF switch, the digital display is
also OFF.
When the appliance is in the 'sleep' mode, the
LED indicator light is on.
Automatic defrosting
The defrosting process is carried out automatically through evaporation of water. By
factory default setting, the appliance is set to execute the defrosting cycle every 6
hours.
The first defrosting cycle is commenced, when the appliance is switched on for the
first time.
The defrosting lasts for 20 minutes. The next defrosting cycle is commenced after 6
hours.
Manual defrosting activation
Summary of Contents for 590LW
Page 1: ...590LW 700807...