Installation Instructions
16 / 48
286426
EN
– even, with sufficient load-bearing capacity, resistant to water, dry and
resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• To install the appliance, perform the following steps:
– Remove the packaging of the appliance, except for the pallet.
– Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
– Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or feet.
– As soon as the appliance is in the planned installation location, remove
the pallet.
– Level the appliance by screwing in or out the feet.
– Remove the protective film from the appliance at the end.
Minimum Clearances
Fig. 4
• If the appliance is standing next to a tall cabinet or wall made of combustible
material, maintain a clearance of at least 50 mm between the appliance and the
cabinet/wall.
Summary of Contents for 6K-EBMF
Page 1: ...6K EBMF 286426...
