Operating Instruction
24 / 48
286426
EN
2. Rotate the dial knob of the selected hob to the
desired power.
The selected power output is displayed on the
corresponding display.
3. To activate the Boost level, set the dial to '9'.
4. Then rotate it one level further.
The acoustic signal sounds. 'P' appears on the display.
5. Then rotate the dial knob again to '9'.
Manual Switching OFF
1. Rotate the dial knob to '0' position.
A blinking point appears on all displays, as shown
in the picture opposite.
After 15 seconds, all displays switch off.
The acoustic signal sounds.
The appliance switches to the Standby mode.
Rapid Heating-Up Function
This function allows the desired power output level to be reached more quickly, but
remains active only for a limited time (see table below).
1. Rotate the dial knob counter-clockwise,
starting with '0', until an acoustic signal is
heard.
The 'A' symbol appears on the display (see
figure).
2. Use the dial knob to set the required power
output level for the selected hob within 10
seconds.
The display will now alternately flash the 'A' symbol and the power output level that
has just been set.
Summary of Contents for 6K-EBMF
Page 1: ...6K EBMF 286426...