Possible Malfunctions
700415
23 / 26
EN
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Error
Possible Cause
Solution
No functions
available
Plug improperly inserted
into a socket.
Remove the plug and insert it
properly in the socket
Electric power supply safety
fuse damaged
Check the fuse, connect the
appliance to another socket
No power supply
Check the electric power
supply
Temperature inside
the appliance is too
high / too low
Condenser obstructed with
dust
Contact the service company
Icy evaporator
Defrost the appliance
Direct sunlight or heat
sources in immediate
vicinity
Move the appliance away
from heat sources
Poor air circulation around
the appliance
Keep sufficient clearance
from walls or other objects
Ambient temperature too
high
Place the appliance in the
right place
Door is not closed properly
or it has been opened for
too long
Close the door tightly; limit the
door opening time to
minimum
Damaged or deformed door
seal
Contact the service company