Installation and operation
700202G
15 / 24
EN
• If the appliance is to be relocated, follow the instructions below:
– switch the appliance off;
– disconnect the plug from the socket;
– take out contents of the appliance;
– tape firmly all loose elements in the internal chamber and tape the door;
– the appliance may only be transported in vertical position.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2
Operation
Tips for the user
• To limit loss of cold air minimize the opening time of doors. Moreover, the sliding
doors should not be opened too often.
• Do not obstruct ventilation openings inside the Cooling top unit. The air must
freely circulate to provide for cooling functionality.
• The food products stored in the appliance must be arranged in sufficient
distances between them. Insufficient distances hinder the cooling effect.
• Cool warm food products down to ambient temperature before placing them the
appliance.
• If possible, in the event of a sudden power failure, avoid opening sliding doors in
order to avoid loss of cool air.
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section
6 'Cleaning'
.
2. To end with, dry the appliance and accessories thoroughly.
