Installation and operation
14 / 24
700202G
EN
5
Installation and operation
5.1
Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never
place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
•
The appliance requir es s uf ficient airflow f or pr oper operation. Ass ure a mini mum later al cl ear anc e of t he appli ance of 10 c m.
•
Die Ö ff nungen am G erät niemals abdec ken oder bl oc ki eren.
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• Place the appliance so that sufficient air circulation is ensured. Leave 10 cm
clearance from walls and other objects.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
