- 39 -
Problem
Cause
Solution
The device does
not cool
sufficiently.
Freezing time too
long
The compressor
starts too often
•
Excessive ice formation on
the interior walls of the
devices.
•
Follow the instructions in
point 6 “Cleaning and care”.
•
The device is located in the
sun exposure or near a
source of heat (stove,
heater).
•
Protect the device against
sun exposure, keep the
distance between the device
and source of heat or
separate with an insulation
board.
•
Amount of fresh food items
is not relevant to the
freezer capacity, or the
items are too warm.
•
Place such amount of
products in the device that is
relevant to the freezer capa
city, cool down warm meals
to the room temperature.
The exterior of
the device is
steamy.
•
Humidity exceeds 70%.
•
Air the room, remove the
cause of the excessive
humidity if possible.
If the problems in operation cannot be eliminated:
-
do not open the body,
-
inform the service or contact the supplier providing:
kind of a problem;
code number and serial number (see identification plate at
the rear wall of the device).
The following does not indicat any problem or failure:
Short, lound sound of whining or clicking when the compressor starts up.
Sound of flowing water. Such a sound is audible at normal operation. It is
produced by the coolant in the system.
Summary of Contents for 700963
Page 1: ...700965 700963 700966 Original Gebrauchsanleitung V1 0216 ...
Page 2: ......
Page 4: ......
