Possible Malfunctions
18 / 22
700221
EN
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Error
Possible Cause
Solution
Insufficient cooling
efficiency
Direct sunlight or heat
sources in immediate
vicinity
Move the Cooling top unit
from the heat source
Poor air circulation around
the Cooling top unit
Keep sufficient clearance
from walls or other objects.
The sliding doors are not
entirely closed or are open
for too long
Close the sliding doors
Limit the opening time of
doors to minimum
Clearance between the
stored food products is too
small or too many food
products in the Cooling top
unit
Make sure the clearance
between food products in
the Cooling top unit is
sufficient
Covered inlet and/or outlet
air vents in the Cooling top
unit
Clear the inlet and outlet air
vents in the Cooling top
unit, by removing food
products and other objects
Summary of Contents for 7450 2E
Page 1: ...7450 2E 700221...
