- 20 -
•
Do not use the accessories and spare parts not recommended by the
manufacturer. They may be dangerous for the user and other people
or may damage the device, harm anyone, and cause loss of warranty
rights.
•
In order to avoid hazards and assure optimum performance it is
forbidden to make any replacements or modifications in the device,
not expressly approved by the manufacturer.
•
The supply cable must not touch the heat sources or sharp edges.
The supply cable should not hang from the table or other surface. Pay
attention to avoid stepping on or tripping by the cable.
•
The supply cable must not be bent, crushed, tangled, it must be
always completely unwound. Do not place the device or other objects
on the supply cable.
•
Do not place the supply cable on carpets or other flammable materials.
The supply cable must not be covered, put in operating range, or
immersed in water or other liquids.
HOT SURFACE!
Burn and injury hazard!
•
Never move the device when it contains hot liquids or food, as they
may cause serious burns. Before cleaning or moving wait for the
device to cool down. Always use the device handles to move it.
•
During the device operation it releases hot steam. Lid should be lifted
or removed only with use of protective gloves or appropriate cloth.
•
Liquid level must not reach higher than 4 cm below the upper vessel
edge. In case of overfilling hot liquid may spill and cause burns.
•
External surfaces of the device become very hot during its operation.
Do not touch them with bare hands to avoid burns. The device should
be operated with use of temperature control knob and handles only.
Summary of Contents for A150510
Page 2: ......
