6 / 8
300185
EN
Assembly
1. Place one lateral section on the ground.
2. To one of the lateral sections of the
Gastronorm trolley assemble 6 crossbars (at
the top, in the middle and at the bottom).
3. Each time, with bottom crossbar, use square
washer between a crossbar and the lateral
section and between lateral section and a bolt.
4. Then, use Allen wrench and tighten bolts.
5. Each time, with middle crossbars, use only
one square washer between the lateral
section and a bolt.
Fig. 1
6. Use Allen wrench and tighten bolts.
7. Mount 6 crossbars on the second lateral section, using washers and blots, as
described above. (Fig. 1)
8. Place the Gastronorm trolley on its
side.
9. Mount 4 swivel caster dampers
onto square tubing of lateral
sections.
10. Finally, screw swivel casters into
square tubing of lateral sections.
(Fig. 2)
Fig. 2
Summary of Contents for AGN1800-2
Page 1: ...AGN1800 2 1 300185 ...
