Cleaning
18 / 24
X1084
EN
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
1. Clean the appliance daily.
ATTENTION!
Regular cleaning provides for consistent grinding effects.
2. Never clean the motor block, power cord not mains plug immersed in water or
under running water. Wipe them with a slightly damp cloth only and leave them
to dry thoroughly.
3. During cleaning of the appliance's detachable elements and the grinder,
observe the following pictures with indications.
1. Unlock the coffee beans container
2. Remove coffee beans
3. Lock the coffee beans container
4. Run the grinder empty
5. Remove the coffee beans container
6. Remove the grinder lock
7. Clean the grinder lock with the
cleaning brush
8. Clean the grinder with the cleaning
brush
9. Clean the ground coffee outlet with
the cleaning brush
10. Press the grinder lock tightly into its
position
11. Lock the grinder lock
12. Install the coffee beans container
and set it in position
13. Lock the coffee beans container
Summary of Contents for apexa 275
Page 1: ...275 X1084...
Page 21: ...Cleaning X1084 19 24 EN Fig 12...
