- 39 -
7. Possible Malfunctions
Problem
Cause
Remedy
Device connected to
the power supply, but
the green operation
control lamp is not lit.
•
Mains plug not inserted
properly.
•
Main/time control knob
not set.
•
Disconnect mains plug and
insert it properly.
•
Set the main/time control
knob.
Device connected to
the power supply, but
does not heat up.
•
Temperature not set.
•
Heating element is
defective.
•
Temperature not set.
•
Heating element is defective.
Device is connected to
power supply, but
does not work.
•
Overheating protection
device has tripped.
•
Let the device cool down.
Press the RESET button at
the rear. When overheating
protection device trips, contact
service or notify your dealer.
Cooking/roasting
result is uneven.
•
Fan is defective.
•
Temperature control
knob is defective.
•
Distance between food
and baking tray above
the food is too low.
•
Contact a dealer
•
Contact a dealer
•
Keep the minimum distance
of 40 mm.
Cooking cavity lamp is
defective.
•
Light bulb is defective.
•
Disconnect the device from
the power supply and let it
cool down. Unscrew the bulb
and replace it with the one
having the same technical
characteristics (220 V, 15 W).
If you cannot eliminate the malfunction:
-
Disconnect the device from the power supply (pull the plug!),
-
Do not open the housing,
-
Notify customer service or contact a dealer.