- 59 -
5.2.2 Gas cooker
Position of burners on the hob
Fig. 14
①
Strong burner
②
Standard burner
③
Triple ring burner
④
Auxiliary burner
Ignition of gas burners
In order to ignite a gas burner, press the appropriate
burner control knob and turn it counterclockwise to the
position with the maximum gas flow (big flame symbol).
Hold the control knob pressed for ca. 10 seconds
until the flame ignites.
After ignition, adjust the flame by turning the control knob
only between the large and small flame, and never
between the large flame and OFF position (o).
Fig. 15
In case of an accidental flame loss (e.g. draught, spilled liquid, etc.) the safety valve
will shut off the gas supply.
Instructions and advice
Avoid the flame exceeding the cooking pot edge.
When the contents of the cooking pot starts boiling, reduce the flame to lower level to
avoid extinguishing the flame by the boiling over contents of the pot.
Be very careful when heating of fats and oils during cooking, as they may ignite when
overheated.
Danger of burns!
Fig. 16
②
①
③
②
④
