- 31 -
7. Possible Malfunctions
PROBLEM
CAUSE
REMEDY
The unit is turned on
but the control light
(brewing indicator) has
not come on.
•
Plug not connected
correctly
•
Fuse of mains opened
•
Control lamp defect
•
Switch defect
•
Connect plug correctly
•
Control fuse, test
machine on other plug
•
Contact supplier
•
Contact supplier
Coffee machine is
turned on but does not
function.
•
Coffee machine is
overdue a
decalcification
•
Pull plug and let coffee
machine cool off, press
RESET-button on the
back of the machine.
Decalcify machine.
The coffee machine
shuts off.
•
Overheating protection
was triggered.
•
Thermostat defect
•
Pull plug and let the
coffee machine cool
off. Press the RESET
button on the back of
the machine.
•
Contact supplier
The unit is turned on,
the brewing indicator is
on, but hot water is not
flowing out.
•
Heating element defect
•
Thermostat defect
•
Contact supplier
•
Contact supplier
The unit is turned on, the
brewing indicator does
not come on and hot
water does not flow out.
•
Control panel is
damaged
•
Damaged filling switch
•
Contact supplier
•
Contact supplier
When turned on a fuse
immediately burns out.
•
Short-circuit
•
Contact supplier
The above problems only serve for orientation and as examples. Should these or
similar problems occur, turn the device off immediately and discontinue using it.
For having the device checked and repaired, contact qualified service personnel
or the dealer immediately.