- 34 -
Before the first use, follow the steps below. Observe the instructions in sections
“Starting” the appliance” and “Settings”:
1. Before the first operation, clean the heating plates.
2. Connect the appliance a grounded single socket.
3. Set the temperature at 300 °C and leave the appliance on without dough for
½ hour with the heating plates opened. Due to the technological residuals smoke
may be emitted during heating. However, it does not indicate any appliance
damage and it will not be released during further operation. Assure good
ventilation in the room during the first heating.
4. Moisten the heating plates with sunflower oil or spray it three or four times with
the anti-adhesion agent. In that way the pores in the plate cast will be closed
and special coating will be formed
.
Leave the appliance closed and on at 250 °C for approx. 20 minutes.
5. Repeat the steps in point 4.
6. Make (without any additional fat/oil) 2 - 4 waffles 220 °C - 230 °C and dispose
of the first waffles.
7. During the process described in point 6 you can notice that every next waffle
becomes better and after a few rounds of waffle making you will get clean and
easily removable waffles.
Starting the appliance
Prepare the waffle dough using your own recipe or our suggestions
(section
“Tips and advice”
).
Close the upper heating plate using the handle.
Connect the appliance to a grounded single socket.
Turn the appliance on using the ON/OFF switch (
5
) (fig.
at the left). The green operation control light will be on.
The red control light (
7
) will be on indicating the heating
of the appliance.
NOTE
For the best results, pre-heat the appliance to the appropriate temperature
before you start baking waffles.
5
7
