- 36 -
5.3 Control panel functions
Device switch on / off
Connect the device to a single grounded socket.
Switch the device on with the main switch on the control panel The green
on/ff control light at the main switch comes on.
Thermostat switch on / off
Press and hold the button
for a few seconds. LED light
starts flashing and
the device switches on. LED light
is on when the device is on and is off then the
devices switches off.
Press the button
and hold for 3 seconds to turn the device off. LED light
flashes and then the device switches off.
Operating temperature setting
When the device is operating the digital display shows the temperature in the
cooling area.
The user may set the - 2 °C to 8 °C temperature
When you press the button
the digital display shows the set
temperature. LED light
flashes.
The digital display shows the temperature for 5 seconds. During that time you can
increase or decrease the temperature using the button
and
.
Press the button
to confirm the setting.
Defrosting
The digital telethermostat automatically
controls the evaporator defrosting.
The defrosting process is indicated
by a relevant LED light.
In this phase you must not place in or
remove anything from the refrigerator.
A relevant probe controls the end of the defrosting process. In particularly difficult
operating conditions (high temperature and humidity in the room or when high
moisture release products are added) a few additional defrosting processes should
be performed manually. To do so, press and hold the button for a few seconds.
