- 31 -
1.
The preset power stage „1600 W“ is selected and the device turns on.
(Power stages: 400, 800, 1000, 1300, 1600, 1800, 2000 2200, 2600 and
3000 W)
With the selection key
or
, you can change the settings at any
time in a range from
(400 – 3000 W).
The LED control lamp
lights up.
2.
The preset temperature stage „120°C“ is selected and the device turns on.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C).
With the selection key
or
you can change the settings at any
time in a range from 60 – 240°C.
The LED control lamp lights up.
Timer function:
After selection of the operating mode (power stage or temperature stage), press the
key. The numeral „0“ appears on the display and the LED control lamp
next
to the display lights up. By pressing the selection key
or
you can select the
operating time in intervals of 5 minutes (up to 120 minutes maximum).
The time is counted down in 1-minute steps; afterwards the display returns to the
previous mode (
, ).
Once the time is up, an acoustic signal sounds and the device automatically goes into
standby mode.
NOTE!
During timer operation, you can change the duration at any time with the selection
key
or
. With the memory function of the device, the power stage or
temperature settings remain unchanged here.
You can also change the power or the temperature stage without changing the time
setting.
NOTE!
If the time is not set, the unit will automatically turn off after 120 minutes.
Summary of Contents for IK 30
Page 2: ... 2 ...
