Installation and operation
105862
21 / 40
EN
When the hob is selected, the '0' indicator
blinks.
4. Set the cooking level in the range of 1
–9
by swiping with your finger over the control
range field, until the required cooking level
is displayed in cooking zone selection.
Cooking level 1 = the lowest level
Cooking level 9 = the highest level
5. If during 1 minute no temperature level is selected, the induction plate switches
off automatically. In such case re-start with step 1.
The setting of the cooking level may be changed any time during the cooking
process.
If
and the cooking level blink interchangeably in the display, it means that:
– no cookware was placed on the suitable heating zone
– the used cookware is not suitable for induction plates
– the cookware is too small or was not place in the middle of the hob.
If heating is not effected, it may mean that no suitable cookware is place on the
heating zone.
If a suitable cookware is not place on the hob, the digital display switches off
automatically after 1 minute.
Cooking Process Finish
1. In the cooking zone selection field, touch the symbol of
the hob to be operated.
2. Swipe with your finger over the control
range field to your left, until '0' is
displayed in the cooking zone
selection field for the selected hob.
Summary of Contents for IKF 72-2Z
Page 1: ...IKF 72 2Z 105862...
