Installation and operation
16 / 18
105817
EN
Appliance Start-up
WARNING!
Risk of burning!
The hob and the appliance housing get very hot during the operation of
the appliance due to hot cookware and they remain hot for some time still
after switching off.
Never touch the hot surface of the appliance.
1. Make sure that the power output controller is set to off position (OFF).
2. Connect the appliance to the power supply.
A sound signal is heard and the power indicator light (ON) is on.
The digital display shows '-'.
The appliance is now in Standby.
Fig. 4
3. Execute the required settings according to indications below.
Power Setting
1. Rotate the power output controller clockwise to set the power output level.
A sound signal is heard and the set power output level appears on the digital
display.
The operation indicator light (WORK) is lit.
The following power output level can be set:
1, 2, 3, 4, 5, 6, 7, 8, 9.
The lowest power output level
1
corresponds to 1000 W; the highest power output
level
9
corresponds to 5000 W.
2. During the cooking/frying process, observe the appliance and the processed
food products.
NOTE!
The set power output level can be changed at any time during operation
by rotating the power controller clockwise or counter-clockwise to the
desired power output level.
Summary of Contents for IND 1K300
Page 1: ...IND 1K300 105817...
