Cleaning
105817
17 / 18
EN
Switching the Appliance OFF
1. After the end of the cooking or heat maintenance process, rotate the power
output controller counter-clockwise to the off position (OFF).
Indicator lights go off.
The appliance switches off immediately.
When the appliance finishes operation, the fans cool down the appliance electronics
for a few minutes and then switch off.
2. Disconnect the appliance from mains power supply.
Overheating Protection
The appliance is equipped with the
overheating protection
. When the critical
temperature is exceeded, the appliance will switch off for safety reasons.
ATTENTION!
Heating up an empty pan or frying pan activates the overheating
protection system; a acoustic signal will sound and the appliance will
switch off.
The digital display shows 'E02'.
Never place empty cookware on the hob.
When overheating protection is activated, remove cookware from the hob and
leave the appliance for a few minutes to cool down.
Then, you may start using the appliance again.
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
Summary of Contents for IND 1K300
Page 1: ...IND 1K300 105817...
