- 28 -
Setup
1. Press the ON/OFF button on the control panel; the
device will turn on and the display will show the
current internal temperature.
NOTE
!
The device is equipped with a microcomputer and memory function. When the device is
turned off or its plug is removed, the device will then cool or heat to the last temperature
setting until a new setting is entered.
2. Set the temperature within a range of 4 °C - 60 °C by pressing the
buttons labeled
˄
and
˅
until the desired temperature is displayed.
3. 5 seconds after the button is last pressed the
display will show the current internal temperature.
Cooling or heating mode is selected automatically
based on the set desired temperature and does not
need to be manually activated. Depending on the
mode selected, a green or red LED control light will
come on at the rear of the device.
4. To activate the device’s internal lighting, when the door is closed
press the button labeled
.
5. After the door is opened, the internal lighting
will be automatically activated whether the
button is pressed or not.
6. When finished using the device, turn it off using the ON/OFF switch
on the control panel and disconnect the device from its power source.
