- 30 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Observe the following instructions when connecting the device, otherwise a risk
of electric shock will result.
The device is adapted for connections to a 12 V jack (cigarette lighter), as well as an
alternating current network 230 V.
CAUTION!
Prior to connecting the cable to a socket, turn the device off using
the ON/OFF switch.
Never connect the AC and DC cables simultaneously as doing so may
damage the device.
Alternating current (AC) 230 V
Direct current (DC) 12 V
Plug one end of the
AC cable
into
the AC terminal on the device
①,
and the other end
②
to a standard
home electrical socket.
Plug one end of the
DC cable
into the
DC terminal on the device
①,
and the
other end
②
to a cigarette lighter jack.
Terminal in e.g.
automobile, boat
Jack
Jack
Standard electrical
outlet
