- 32 -
3. 5 seconds after the button is last pressed the
display will show the current internal temperature.
Cooling or heating mode is selected automatically
based on the set desired temperature and does not
need to be manually activated. Depending on the
mode selected, a green or red LED control light will
come on at the rear of the device.
4. To activate the device
’s internal lighting, when the door is closed
press the button labeled
.
5. After the door is opened, the internal lighting
will be automatically activated whether the
button is pressed or not.
6. When finished using the device, turn it off using the
ON/OFF
switch
on the control panel and disconnect the device from its power source.
Tips and advice
Food products kept in the fridge should be stored in their original packing or
appropriate containers.
Ensure the device
’s cooling capacity is appropriate for the food products intended to
be stored inside.
Warm food products should be allowed to cool before placing them inside the fridge.
Do not allow beverages and food products in glass containers to cool excessively.
When frozen, liquids and food products increase in volume, which may result in
damage to glass containers.
To avoid cold air loss, only open the device when necessary and close it as quickly
as possible.
