- 40 -
5.2 Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
Use the device near the socket to quickly disconnect the plug when required.
Working area
The working area must be consistent with the requirements of the Directive
89/654/EEC.
The surface on which the device will be placed after use must have sufficient size, must
be well-lit, clean and dry. These are important requirements related to the safety of
personnel.
No foreign objects may be found in the working area.
