- 26 -
Therefore the operating and maintaining persons must be trained in range of
operations with removed covers and must be informed of resulting hazards, as well
as authorized by the responsible person.
They must also use appropriate personal protective measures or wear the anti-cut
gloves.
5.2 Start-up and operation
The device operation must be ordered only to the authorized and properly trained
personnel, having sufficient technical experience.
Before the device activation:
-
thoroughly read the technical manual,
-
become familiarized with the protective devices
and emergency mechanisms, as well as their
locations and operation methods.
Operation of the device parts designed for protection by the unauthorized persons
may cause malfunctions or hazard for the operating person. The operating person
must be properly trained, informed of the residual risk and correct operation.
Assembly/disassembly
WARNING!
All operations connected with assembly/disassembly of each device part must
be performed with motor turned off and plug removed from the socket.
The device assembly consists of a few operations:
1. Place the retaining flange (5)
of the mixing stick shank (6)
on the quick-coupling (2) of
the device body (3).
2. Rotate the mixing stick shank
(6) anticlockwise, so it is
connected with the device
body (3) in a rigid way.
Follow the instructions on the
device body!
The disassembly is performed as above, but in opposite order.
②
①
⑥
⑤
③
