- 31 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
Place the unit so that the plug is easily accessible and can be quickly removed from
its socket in case of necessity.
5.2 Operation
Starting / Settings
WARNING! Health hazard due to smoke!
Due to the food residues, there may appear some smoke
when grilling.
During the first use, do not place any food products in
the device and make sure that the place of installation is
well ventilated.
Before the first use, clean the device thoroughly according to the instructions
included in
section 6
„Cleaning
and maintenance
“
. Dry the device thoroughly.
Install the grease collection tray in the device and make sure that the device is used
only with the mounted grease connection tray to avoid damaging the device or
soiling.
Close the device using the service handle.
Connect the device to the single grounded socket.
Set the ON/OFF switch to
„I“
position to switch the device on. The device is ready to
work, the green control light embedded in the ON/OFF switch comes on.
