- 33 -
Open the device using the service handle.
NOTE!
Do not use any hard or sharp objects on the grill to prevent damaging the
surface or control elements.
Remove the grilled food from the grill plate.
If the device is no longer used, turn the ON/OFF switch to
O
position and switch the
power supply off (pull the plug from the mains socket!).
Grease collection tray
Regularly empty the grease collection tray, after the device, grease collection tray and
its contents cooled off.
WARNING! Risk of burns!
Protect your hands and face against possible grease
splashes!
Safety thermostat
NOTE!
The device is equipped with safety thermostat which is triggered in case of
overheating of the device and automatically switches the device off.
If the safety thermostat is triggered, disconnect the device from the power
supply (pull the plug from the socket!) and leave it to cool off.
Press RESET button located at the bottom of the device.
In case of frequent triggering of the safety thermostat within short intervals,
please contact the service.
Setting of the service handle / upper grill plate
If the service handle does not remain still in a lifted
position or comes down, you need to tighten the
screws in a brass block at the rear of the device using
the supplied Allen wrench.
