- 31 -
7. Possible Malfunctions
Problem
Cause
Solution
No cooling
effect at all.
•
Plug not connected to
socket.
•
Defective fuse.
•
Power breakdown.
•
Connect the plug properly.
•
Check the power supply.
•
Check the power supply.
Cooling effect
insufficient.
•
Direct sunlight or heat
sources nearby.
•
Bad air circulation around
the device.
•
Doors are not closed
properly or have been open
for too long.
•
Door sealing is damaged or
deformed.
•
Interspaces between the
foods are too small or too
many foods are stored.
•
Air inlet and/or air outlet
blocked.
•
Remove the device from the
heat source.
•
Arrange sufficient space
between walls and other
items.
•
Properly close the doors.
Keep the door opening
periods low. Contact the
retailer.
•
Contact retailer
•
Arrange sufficient space
between the foods in the
device and remove
dispensable foods.
•
Keep free/ unblock the air
inlet/outlet from (parts of)
food or other material.
Heavy noise.
•
The device does not stand
on an even surface.
•
The device touches walls
or other items.
•
Set the device on an even
surface.
•
Arrange sufficient space
between device and walls
and/or other items.
The compressor
does not switch
off automatically.
•
The device is too full.
•
Door has been open for too
long.
•
Remove dispensable foods.
•
Keep the door opening
periods low.
The aforementioned problems are only examples. If these or other problems
appear, turn the device off immediately and stop using it. Ask for help from
qualified specialist personnel in examining and repairing the device.
