background image

 

 

 

- 19 - 

1.3 Liability and Warrantees 

 

All the information and instructions in this manual take into account standard safety 
regulations, current levels of technical engineering as well as the expertise and 
experience we have developed over the years. 
The instruction manual was translated with all due care and attention. However, we do 
not accept liability for any translation errors. The German version of this instruction 
manual is definitive. 
If the delivery consists of a special model, the actual scope of delivery may differ from 
the descriptions and illustrations in this manual. This is also the case for special orders 
or when the device has been modified in line with new technology.  

NOTE! 

Read this manual carefully and thoroughly before any operation of the device, 
and especially before turning it on!
 

Manufacturer is not liable for any damages or faults caused by: 

-

 

violation of advice concerning operation and cleaning; 

-

 

use other than designed; 

-

 

alterations made by user; 

-

 

use of inadequate spare parts. 

 

We reserve the right to make technical changes for purposes of developing and improving 
the useful properties. 

 
 

1.4 Copyright protection 

 

The instruction manual including any texts, drawings, images or other illustrations is 
copyright. No part of this publication may be reproduced, transmitted or used in any 
form or by any means without permission in writing from the manufacturer. Any person 
who commits any unauthorized act in relation to this publication shall be liable to claims 
for damages. All rights reserved. 

 

NOTE! 

The contents, texts, drawings, pictures and any other illustrations are copyright 
and subject to other protection rights. Any person unlawfully using this 
publication is liable to criminal prosecution. 

 
 

1.5 Declaration of conformity 

 

The device complies with the current standards and directives of the EU. 
We certify this in the EC declaration of conformity. 
If required we will be glad to send you the according declaration of conformity. 

Summary of Contents for Panorama 550L


















Reviews: