Installation and operation
150159
13 / 22
EN
5
Installation and operation
5.1
Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never
place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• The surface where the appliance is installed must be easily accessible and
large. In order to assure comfortable operation and proper air circulation leave
at least 15 cm clearance at both sides and at the back from walls, cabinets, etc.,
as well as 50 cm in front and over the top.
Summary of Contents for PRO 2,5L
Page 1: ...PRO 2 5L 150159...
