Installation and operation
A190149
15 / 24
EN
ATTENTION!
Do not fill the water tank with water over the maximum indication on the
fill level indicator!
Never use warm water for coffee preparation in this appliance!
Never use the appliance without water!
• Pay attention to the minimum required volume for brewing during the coffee
preparation. It is:
for A190149: 20 cups
— 3.0 litres
for A190199: 30 cups
— 4.5 litres
3. To assemble the filter basket assembly put the riser pipe into the filter basket
opening and place both elements together in the tank.
4. Make sure that the riser pipe is placed in the centre of the heating bowl in the
tank bottom.
5. Put the right round paper filter into the filter basket.
NOTE!
The coffee maker may be used only with the round paper filter.
We recommend the right round paper filter: BARTSCHER A190009 or A190009250
for Regina Plus 40 (A190149) model and round paper filter A190011 or
A190011250 for Regina Plus 90 (A190199) model.
6. Pour coarsely ground coffee to the filter basket (approx. 6 g per cup).
NOTE: The recommended coffee amount may be larger or smaller,
depending on the preferences.
7. Close the water tank with the lid. To lock it, follow the instructions given on the
lid.
ATTENTION!
Before connecting the appliance to the mains supply, make sure the
ON/OFF switch is in 'O' position.
8. Plug the appliance into a suitable single socket.
9. Start the coffee maker by switching the ON/OFF switch to position
'I'
.
During the brewing process the red operation control light in the switch will come
on.
When the brewing process is finished, the green warm-keeping indicator light will
come on additionally.
