Operating Instruction
117650
37 / 66
EN
Starting and Stopping Thermal Processing
1. After setting thermal processing parameters as desired, press START key (9,
Fig. 18), to start thermal processing.
The appliance will start operating in pre-
heat mode if this has been previously
selected. Otherwise, it moves directly to
the thermal processing mode.
By pressing 'Advanced Customisation' key
(Fig. 19), you may manually select a
specific starting phase for thermal
processing or exchange it with a thermal
processing phase of another thermal
processing mode, by selecting this thermal
processing phase and confirming it with
START key.
Thermal processing will last until the set
time elapses or on reaching the product
core temperature in the thermal
processing mode with thermal core probe.
Fig. 18
In INFINITE time is set, thermal processing must be stopped manually.
2. To this end, press STOP key (10, Fig. 18).
