Operating Instruction
42 / 66
117650
EN
– finally, press 'Next' key (16, Fig. 22);
– then, with the keyboard, introduce the thermal processing program
name;
– press Enter key (key 17, Fig. 22), to save the thermal processing
program.
Modifying Thermal Processing Program
On delivery the appliance will already contain some thermal processing programs.
Both the pre-loaded thermal processing programs and the newly created ones can
be customised.
To modify a thermal processing program,
first select the desired thermal
processing program from 'Recipes' cook
book.
Once selected, a summary of phases of
the selected program is displayed. This
mode is write-protected and it is not
possible to modify the thermal
processing program parameters.
1. If one or more thermal processing
parameters are to be changed or
automatic pre-heating is to be
activated/deactivated, press
"Advanced customisation” (key 18,
Fig. 23).
Fig. 23
The program is unlocked and the required changes
may be introduced.
2. Turn the rotary control knob (19, Fig. 24) to display
the thermal processing phase to be changed.
After making the change you can start thermal
processing directly. In this case, the changes will only
apply to current thermal processing and will not be
saved.
3. You can also create a copy of the program with a
different name which includes the changes made.
Fig. 24
